Skip to Main Content
Menu
Updating...
Tractorseats.com
Suspensions  >  KM Ultra Low Mechanical Suspension

KM Ultra Low Mechanical Suspension

KM Ultra Low Mechanical Suspension
SKU: 6081
$219.00
High Quality Product
Industry Experience
Quick Shipping
Customer Support
Use the KM Ultra Low Mechanical Suspension as a direct replacement where vertical height is limited to improve comfort, performance and productivity in your ag or construction equipment, ensuring that you have the smoothest ride possible.
Special Notes
Please Note: It is the buyer's responsibility if they are purchasing this item that it will fit their application. Please check the Technical Drawings under the More Info tab to view the mounting pattern provided so you can measure your current seat application to compare for compatibility.

This suspension is designed to fit between your seat and seat slide rails, so measure your bolt mounting pattern on the very bottom of the seat where the slide rails bolt/mount to the seat.

This suspension is made by a name brand manufacturer and is used by most name brand zero turn mower companies. It has a universal type mounting and fits a lot of name brand mowers, but some models vary due to year changes. This suspension will not fit all models.
Specifications
Features:
  • Ideal for vertically limited applications
  • Base width of 12.88"
  • Wide base provides extra stability
  • Easy to use and operate weight control
  • Suspension travel of 1"
  • 275 lb maximum weight capacity
  • Maximum height adjustment of 2.75"
Top mounting pattern of 10.69" - 11.25" side-to-side x 11.5" front-to-back.
Applications
Ideal for Garden Tractors and Lawn Mowers
Reviews

Customer Reviews

(4.20)stars out of 5
# of Ratings: 5
(Only registered customers can rate)
1. on 11/15/2016, said:
4 stars out of 5
Cub Cadet Installation - Installed the #6081 seat suspension along with the #6043 Slide Rails, on my 1976 Cub Cadet 1000. You have to remove the stock seat and springs and then drill 4 new 5/16 mounting holes in the cub cadet battery cover assembly using the 11" x 11" bolt pattern of the slide rails. Take whatever time necessary to line up the locations for the new holes as exactly as possible. The 2 rear holes should not be closer than 1" from the rear of the battery cover assembly. Mount the seat (I used a new K & M 123 seat) to the top of the new seat suspension, and then slide rails to the bottom of the new seat suspension. Then mount the whole new assembly to the cub cadet battery cover. If the new holes in the battery cover were aligned correctly, the new seat assembly will fit perfectly. I used all of the hardware provided and reused some of the cub cadet bolts. The original cub cadet seat will not fit this suspension without being modified with new holes. The new seat that I used has an 11.25" x 11.50" bolt pattern which will fit the #6081 suspension. If you don't use slide rails, you have to allow for adequate spacing beneath the seat suspension, to allow for seat travel. I took a few laps around the yard and I am very happy with the new suspension, so far. But with the late spring this year, I have not had much opportunity to use the tractor yet. I'll follow this up in a few months, once I have a chance to use it more. I'll also send some pictures at that time.
Was this comment helpful?
(0 people found this comment helpful, 0 did not)
2. on 11/15/2016, said:
4 stars out of 5
Universal settings did not align with Gravely HD2760 ZTR, but can drill holes and make work.
Was this comment helpful?
(0 people found this comment helpful, 0 did not)
3. on 11/15/2016, said:
4 stars out of 5
Disappointed it didn't fit - The product was well built, however it did not fit my application. I sent it back, it would have fixed my needs if the frame of my mower was more compatible. I am considering other items, and hoping other options may work.
Was this comment helpful?
(0 people found this comment helpful, 0 did not)
4. on 11/15/2016, said:
5 stars out of 5
SUSPENSION - I WOULD HAVE GIVEN IT 5 STARS EXCEPT FOR THE FACT THE ENTIRE UNDERSIDE OF THE SUSPENSION NEEDS TO BE OPEN OR IT WILL BOTTOM OUT, OUCH. BUILT WELL AND SHOULD LAST ALONG TIME.
Was this comment helpful?
(0 people found this comment helpful, 0 did not)
5. on 11/15/2016, said:
4 stars out of 5
This is a great addition to my mower - I added this to my John Deere F-620 Zero Turn and it makes mowing rough ground so much less painful. It was not an easy install due to the design of my mower but I am glad I bought it.
Was this comment helpful?
(0 people found this comment helpful, 0 did not)
Showing comments 1-5 of 5
WARNING: Cancer and reproductive harm. www.P65Warnings.ca.gov
Loading...